The RMX is back up and fully functional after the scheduled maintenance to replace the chassis.
- After extensive diagnostics, it was determined that there was an issue with the backplane of slot 1 in the original chassis so only the chassis was replaced.
- The MPM-F card originally in slot 1 which was thought to be the problem was tested and found to be fully functional, all modules including this MPM-F card were migrated to the replacement chassis.
- All settings and reservations that were on the RMX prior to the replacement are present and intact on the replacement chassis.
- There are no active alarms on the replacement chassis nor on any of the modules, the hardware monitor shows normal on all slots, and there are green ready lights across the board on the physical hardware.